文章来源：www.trsjjx.com 发布时间：2014-11-30 11:20:06 浏览次数：
Hydraulic lift valve kit set up control valve lift is also a return to oil installations. Between institutions and return oil back to the oil tanks. Now lift to diesel, electric rotary type two lifts, has also developed a battery-vehicle hydraulic lift aerial work platform lifts, it is the use of battery-driven, lift, variable speed, you can make high-altitude operations more secure, convenient, noise reduction yes and environmentally friendly.
Inside and outside the framework of the hydraulic lifts were all down through the bearing and rail links in the base plate shelves and countertops. Inside and outside the framework related to the pin connected to the fuel tank inside and outside the framework of each link, even a rod installed in the synchronized axis, the middle part of the cylinder rod with a link structure to facilitate handling, smooth operation, easy to operate. Hydraulic lift stepped bore has a cross-sectional U-shaped shaft valve sleeve, the bottom surface of the valve sleeve has a through hole. Formed between the stepped bore and the valve sleeve has a gap, i.e. a gap is formed between the valve sleeve and the stepped bore sidewall the sidewall, the gap may be formed between the bottom of the valve sleeve and the stepped hole bottom, the bottom of the valve sleeve and the stepped bottom of the hole gap can be realized through the creation of lead tank, you can also set up at the bottom of the sleeve to achieve a rough surface, the organizational structure of the lift in the step by step increase, according to the habits and needs of users, technology continues to improve, improve, so will give a lift we bring more convenience.
在使用完之后要对液压升降平台的机身进行清理，在升降过程中留下的材料残留 有些可能会腐蚀升降机。每个月最好用机油对轴等部位进行加油。 1.溢流阀压力调节不符合要求 调整压力到要求值。 2.油缸内泄 检查或更换油缸...TIME：2019-9-9