您好,欢迎您来访济南天锐升降机械有限公司! 公司主营:液压升降机、液压登车桥、液压升降平台、液压升降货梯等。

济南天锐升降机械有限公司

液压升降平台
丰富的升降机设备生产经验
为您提供用心的升降机全套解决方案
分类导航CLASSIFIED NAVIGATION
联系天锐机械 / Contact us
联系天锐机械

济南天锐升降机械有限公司

客户统一咨询热线

188-5411-2626

联系电话:0531-84250097

公司地址:山东省济南市济阳区济阳街道工业园15-4号

当前位置:  >  新闻中心

液压升降机操作控制方式分类

文章来源:www.trsjjx.com   发布时间:2016-11-4 10:51:54   浏览次数:

返回:新闻动态

1、有专职司机操作控制的液压升降机电气控制系统:台面内手柄控制、台面内按钮控制、信号控制液压升降平台电气控制系统都是需要设专职司机操作控制的液压升降机控制系统。
There is a full-time driver operating hydraulic elevator electrical control system control: internal control, internal handle table table button of electrical control system of hydraulic lifting platform control, signal control is needed to set up a full-time driver operation of hydraulic elevator control system. 

2、无专职司机操作控制的液压升降机电气控制系统:台面外按钮控制、台面内外按钮控制、两台并列控制、三台以上机群控制的升降机电气控制系统都是不需要专职司机进行操作控制升降平台机电气控制系统。
No driver operation of hydraulic elevator electrical control system: Control Table button control, button control, and table two parallel control, elevator electrical control system of more than three units of cluster control are not full-time drivers for operation control the electric control system of lifting platform. 

3、有/无专职司机操作控制液压升降机的电气控制系统:集选控制升降平台的电气控制系统,就是有/无专职司机操作控制的升降机电气控制系统。采用这种操作控制方式的升降机,台面内操纵箱上设置一只转换“有、无、检”三种工作模式的钥匙开关,管理人员或死机可以根据乘载任务的忙、闲以及出现故障或维护保养等实际需要,用专用钥匙扭动钥匙开关或扳动开关,将升降机置于有司机控制、无司机控制、检修慢速运行控制等三种运行模式,以适应不同承载任务或升降机保养维修工作的液压升降机电气控制系统。
 The electric control system of the hydraulic elevator with and without full time driver operation control system: the electric control system of the control lift platform is the electric control system of the elevator. Using this elevator operation control mode, a key switch control box is arranged on the table in a conversion "with or without inspection," three working modes, management personnel or crash according to the loading task busy, failure or maintenance time and the actual needs, use special key twist and a key switch a driver will switch the elevator control, driver control, maintenance of slow running control three operation modes in order to adapt to the different electrical control system of hydraulic elevator carrying tasks or lift maintenance maintenance work.