您好,欢迎您来访济南天锐升降机械有限公司! 公司主营:液压升降机、液压登车桥、液压升降平台、液压升降货梯等。

济南天锐升降机械有限公司

液压升降平台
丰富的升降机设备生产经验
为您提供用心的升降机全套解决方案
分类导航CLASSIFIED NAVIGATION
联系天锐机械 / Contact us
联系天锐机械

济南天锐升降机械有限公司

客户统一咨询热线

188-5411-2626

联系电话:0531-84250097

公司地址:山东省济南市济阳区济阳街道工业园15-4号

当前位置:  >  新闻中心

济南液压升降机出现偏摆现象的原因是啥?

文章来源:www.trsjjx.com   发布时间:2016-9-18 10:07:45   浏览次数:

返回:新闻动态

济南液压升降机实用于一些车站啊、码头啊、商场啊、工厂啊等各个场所,有客户反映购置的液压升降机存在偏摆现象,这是什么原因呢? Ji'nan hydraulic lifts are practical in some stations, docks, ah, shopping malls, factories, ah, and other places, there are customers to reflect the purchase of the hydraulic lift there is a phenomenon, what is the reason?

1.机械偏摆分为前后来回摆动和左右来回摆动,由于济南液压升降机的结构原理,前后偏摆现象很少见,在这里主要说的是左右偏摆。Mechanical partial pendulum is divided into before and after swinging back and forth, and swing back and forth, due to the structural principle of hydraulic lift in Ji'nan, before and after the partial swing phenomenon is very rare, here is mainly about the left and right.

2.济南液压升降机的摆动幅度,随着升降高度的变化而变化的,升的高度越高升降机械的摆动就会越大。Ji'nan hydraulic lift of the swing amplitude, with the change of the height of the lift and change, the higher the height of the lift will be the greater the swing of the mechanical.

3.济南液压升降机偏摆幅度最小,移动时平台偏摆幅度略大,其偏摆幅度最大限度为3-5公分。Ji'nan hydraulic lift partial swing is the smallest, when the platform moves slightly larger amplitude, its partial swing amplitude of the maximum limit of 3-5 cm.

4.感觉到的小幅度摆动,这都是正常反操作人员不用惊慌,在这时需要稳固好液压升降机的四周,液压升降机严禁超载。Feel the small swing, this is the normal anti operator need not panic, at this time need to be solid around the hydraulic lift, hydraulic lift is strictly prohibited.

5.液压升降机偏摆幅度过大时应立即停止作业并断开电源,请专业人士进行维修,严禁私自维修。Hydraulic lift is too large to be too large, should immediately stop working and disconnect the power supply, please professionals to repair, maintenance is strictly prohibited without permission.

济南液压升降机的摆动幅度应该保持在规定范围之内,但不可漫不经心,发现问题及时处理,清除安全隐患,让液压升降机保质保量的完成升降作业。 Ji'nan hydraulic elevator swing range should be kept within the specified range, but can not be casual, found that the problem in a timely manner, clear security risks, so that the quality and quantity of hydraulic lift to complete the lifting operation.