您好,欢迎您来访济南天锐升降机械有限公司! 公司主营:液压升降机、液压登车桥、液压升降平台、液压升降货梯等。

济南天锐升降机械有限公司

液压升降平台
丰富的升降机设备生产经验
为您提供用心的升降机全套解决方案
分类导航CLASSIFIED NAVIGATION
联系天锐机械 / Contact us
联系天锐机械

济南天锐升降机械有限公司

客户统一咨询热线

188-5411-2626

联系电话:0531-84250097

公司地址:山东省济南市济阳区济阳街道工业园15-4号

当前位置:  >  新闻中心

济南液压升降机的导轨柱如何竖起?

文章来源:www.trsjjx.com   发布时间:2016-4-27 8:58:34   浏览次数:

返回:新闻动态

济南液压升降机http://www.trsjjx.com/有两边四组导轨支撑而起的,常规情况下导轨的长度要比总的行程高度高于两米。由于导轨柱高度和重量非常的大,所以很多时候安装起来特别的不方便。下面济南天锐升降机械的专家给大家详细分析一下液压升降机的导轨柱如何竖起?

济南液压升降机如果安装到室外,由于位置在室外,可以选择使用吊车进行吊装。吊车把导轨柱竖起再进行焊接,这样就比较方便了。如果室外安装又没有办法进入吊车,就需要搭建承重的支架再吊电动葫芦再进行安装;济南液压升降机如果安装在室内,由于情况比较复杂,如果是常规的楼板安装可以选择使用电动葫芦吊装。而钢结构厂房在安装的时候一定要先看安装的位置上空是否有主梁,如果没有承重的主梁也要考虑搭建。
Ji'nan hydraulic lift if installed to the outside, because the position is on the outside, you can choose to use the crane hoisting. The Crane put rail column erected and then welding, so it is more convenient. If outdoor installation and there is no way to access to the cable car, you need to build bearing bracket hanging electric hoist and install; Jinan hydraulic lift if the installation in the interior, the situation is more complex, if it is conventional floor installation can choose to use electric hoist lifting. The steel structure plant in the installation of the time must first look at the location of the installation of the main beam, if there is no bearing of the main beam should be considered to build. 

如果还有其它的一些较为复杂的状况,客户在购买的时候一定要先与供货商咨询,以免货到之后无没有办法安装。正常情况下,济南天锐升降机械会去派工作人员去测量地基然后看安装环境再进行对客户设备定制,所以请广大用户放心。
If there are other more complex situation, the customer at the time of purchase must first consult with the supplier, so after the arrival of the goods without a way to install. Under normal circumstances, Ji'nan days Rui lifting machinery to send staff to measure the ground and then see installation environment and then carried out on the customer equipment, so rest assured.